Defines a AutomaticMethod.
Declaration Syntax
public class AutomaticMethod : MeshControl
Table 851: Members
|
Property | Active |
Gets the Active. |
|
Property | AggressiveInflateOption |
Gets or sets the AggressiveInflateOption. |
|
Property | AggressiveTetImprovement |
Gets or sets the AggressiveTetImprovement. |
|
Property | Algorithm |
Gets or sets the Algorithm. |
|
Property | ApproximativeNumberOfElementsPerPart |
Gets or sets the ApproximativeNumberOfElementsPerPart. |
|
Property | AutoCollapseShortEdges |
Gets or sets the AutoCollapseShortEdges. |
|
Property | AutomaticNodeMovement |
Gets or sets the AutomaticNodeMovement method under PCTet. |
|
Property | AutoPinchFaces |
Gets or sets the AutoPinchFaces. |
|
Property | AutoPinchTolerance |
Gets or sets the AutoPinchTolerance. |
|
Property | AutoRemoveThinFaces |
Gets or sets the AutoRemoveThinFaces. |
|
Property | AutoRepairFeatureAngle |
Gets or sets the AutoRepairFeatureAngle. |
|
Property | AutoRepairPartialDefeature |
Gets or sets the use of partial defeature, which partially removes thin faces and sharp angles within provided tolerances, such that only topology impacting mesh quality is removed. |
|
Property | AutoSharpAngle |
Gets or sets the AutoSharpAngle. |
|
Property | AutoShortEdgeLength |
Gets or sets the AutoShortEdgeLength. |
|
Property | AutoThinFaceWidth |
Gets or sets the AutoThinFaceWidth. |
|
Property | BFCartSubType |
Gets the BFCartSubType. |
|
Property | BFCartTolerance |
Gets the BFCartTolerance. |
|
Property | BodyStackingType |
Gets or sets the BodyStackingType. |
|
Property | CartesianSize |
Gets or sets the CartesianSize in Multizone. |
|
Property | CartSweepSpacingOption |
Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points). |
|
Property | Children |
Gets the list of children. (Inherited from MeshControl.) |
|
Property | Clearence |
Gets or sets the Clearence. |
|
Property | Comments |
Gets the list of associated comments. (Inherited from MeshControl.) |
|
Property | ConstrainBoundary |
Gets or sets the ConstrainBoundary. |
|
Property | ControlMessages |
Gets the ControlMessages. |
|
Property | CoordinateSystem |
Gets or sets the CoordinateSystem. |
|
Property | CornerAngle |
Gets or sets the CornerAngle. |
|
Property | CurvatureNormalAngle |
Gets or sets the CurvatureNormalAngle. |
|
Property | DataModelObjectCategory |
Gets the current DataModelObject's category. |
|
Property | DecompositionType |
Gets or sets the DecompositionType in Multizone. |
|
Property | DefeatureLayerVolume |
Gets or sets the DefeatureLayerVolume. |
|
Property | DefeaturingTolerance |
Gets or sets the DefeaturingTolerance. |
|
Property | DefinedBy |
Gets or sets the DefinedBy. |
|
Property | ElementMidsideNodes ***OBSOLETE*** Use the ElementOrder property instead. |
Gets or sets the ElementMidsideNodes. |
|
Property | ElementOption |
Gets or sets the ElementOption. |
|
Property | ElementOrder |
Gets or sets the ElementOrder. |
|
Property | FaceProximityGapFactor |
Gets or sets the FaceProximityGapFactor for PCTet. |
|
Property | FallBackMeshType |
Gets or sets the FallBackMeshType. |
|
Property | FeatureAngle |
Gets or sets the FeatureAngle. |
|
Property | FeatureProtectionAngle |
Gets or sets the DihedralAngle for AutoNodeMove under PCTet. |
|
Property | Figures |
Gets the list of associated figures. (Inherited from MeshControl.) |
|
Property | FilletCollapse |
Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ). |
|
Property | FillingDirection |
Gets or sets the FillingDirection. |
|
Property | FillingFraction |
Gets or sets the FillingFraction. |
|
Property | FreeFaceMeshType |
Gets or sets the FreeFaceMeshType. |
|
Property | FreeMeshType |
Gets or sets the FreeMeshType. |
|
Property | GenerateLayersUsingFacets |
Gets or sets the GenerateLayersUsingFacets. |
|
Property | Images |
Gets the list of associated images. (Inherited from MeshControl.) |
|
Property | ImprovementIterations |
Gets or sets the ImprovementIterations for AutoNodeMove under PCTet. |
|
Property | InflateRelativeTolerance |
Gets or sets the InflateRelativeTolerance. |
|
Property | InternalObject |
Gets the internal object. For advanced usage only. |
|
Property | KeyPointsSelection |
Gets or sets the KeyPointsSelection. |
|
Property | KeyPointsTolerance |
Gets or sets the KeyPoints Tolerance in Multizone. |
|
Property | LateralDefeatureSize |
Gets or sets the LateralDefeatureSize. |
|
Property | LayerHeight |
Gets or sets the LayerHeight. |
|
Property | LayerStart |
Gets or sets the LayerStart. |
|
Property | Location |
Gets or sets the Location. |
|
Property | MappedSweptType |
Gets or sets the MappedSweptType. |
|
Property | MatchMeshWherePossible |
Gets or sets the MatchMeshWherePossible. |
|
Property | MaximumElementSize |
Gets or sets the MaximumElementSize. |
|
Property | MeshBasedDefeaturing |
Gets or sets the MeshBasedDefeaturing. |
|
Property | MeshFlowControl |
Gets or sets the MeshFlowControl. |
|
Property | MeshInCenter |
Gets or sets the MeshInCenter. |
|
Property | MeshType |
Gets or sets the MeshType. |
|
Property | MeshUsingVoxelization |
Gets or sets the MeshUsingVoxelization. |
|
Property | Method |
Gets or sets the Method. |
|
Property | MinimumEdgeLength |
Gets the MinimumEdgeLength. |
|
Property | MinimumSizeLimit |
Gets or sets the MinimumSizeLimit. |
|
Property | MinimumThickness |
Gets or sets the MinimumThickness for PCTet. |
|
Property | MZSweepNumberDivisions |
No details are provided for this entry. |
|
Property | NamedSelection |
Gets or sets the NamedSelection. |
|
Property | NumberOfCellsAcrossGap |
Gets or sets the NumberOfCellsAcrossGap. |
|
Property | NumberOfElementLayers |
Gets or sets the NumberOfElementLayers for PCTet. |
|
Property | OverlappingAngle |
Gets or sets the OverlappingAngle. |
|
Property | PartialFill |
Gets or sets the PartialFill. |
|
Property | ParticleCoordinateSystem |
Gets or sets the ParticleCoordinateSystem. |
|
Property | ParticleDiameter |
Gets or sets the ParticleDiameter. |
|
Property | PreserveBoundaries |
Gets or sets the PreserveBoundaries. |
|
Property | PrimeMethodAutoRepair |
Gets or sets the PrimeMethodAutoRepair. |
|
Property | PrimeRepairTolerance |
Gets or sets repair tolerance length for Prime meshing. This can be used to reduce variability of output topology, prevent the collapse and defeature of thin or short topologies, and allow the creation of a coarse mesh while keeping topology as-is. |
|
Property | ProjectCornersToTop |
Gets or sets the ProjectCornersToTop. |
|
Property | ProjectInConstantZPlane |
Gets or sets the ProjectInConstantZPlane. |
|
Property | ProjectionFactor |
Gets or sets the ProjectionFactor. |
|
Property | RadialGrowthRate |
Gets or sets the RadialGrowthRate. |
|
Property | RefineAtThinSection |
Gets or sets the RefineAtThinSection for PCTet. |
|
Property | Refinement |
Gets or sets the Refinement. |
|
Property | RefineSurfaceMesh |
Gets or sets the RefineSurfaceMesh for PCTet. |
|
Property | RelativeTolerance |
Gets or sets the PrimeRelativeTolerance. |
|
Property | RemoveSharpAngleFaces |
Gets or sets the RemoveSharpAngleFaces. |
|
Property | RepairFacets |
Gets or sets the RepairFacets. |
|
Property | RestrictNodeMovementsToSurface |
Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet. |
|
Property | ReuseBlocking |
Gets or sets the ReuseBlocking. |
|
Property | ScopingMethod |
Gets or sets the ScopingMethod. (Inherited from MeshControl.) |
|
Property | ShowAdvancedImproveOptions |
Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet. |
|
Property | SlicerFeatureAngle |
Gets or sets the SlicerFeatureAngle. |
|
Property | SliverTriangleHeight |
Gets or sets the SliverTriangleHeight. |
|
Property | SmoothMeshSpacing |
Gets or sets the SmoothMeshSpacing in Multizone. |
|
Property | SmoothTransition |
Gets or sets the SmoothTransition. |
|
Property | SolidShellElementForStacker |
Gets or sets the SolidShellElementForStacker. |
|
Property | SolidShellElementForStackerGeometrySelection |
Gets or sets the SolidShellElementForStackerGeometrySelection. |
|
Property | SolidShellElementForStackerNamedSelection |
Gets or sets the SolidShellElementForStackerNamedSelection. |
|
Property | SolidShellElementForStackerScopingMethod |
Gets or sets the SolidShellElementForStackerScopingMethod. |
|
Property | SourceLocation |
Gets or sets the SourceLocation. |
|
Property | SourceTargetSelection |
Gets or sets the SourceTargetSelection. |
|
Property | SpacingOption |
Gets or sets the SpacingOption. |
|
Property | SplitAngle |
Gets or sets the SplitAngle in Multizone. |
|
Property | SrcTrgNamedSelection |
Sets Named selection as Source/Target for MultiZone control. |
|
Property | SrcTrgScopingMethod |
Sets Scoping method for Source/Target selection for MultiZone control. |
|
Property | StackerCoordinateSystem |
Gets or sets the StackerCoordinateSystem. |
|
Property | StackerFreeFaceMeshType |
Gets or sets the StackerFreeFaceMeshType. |
|
Property | StackerTriangleReduction |
Gets or sets the StackerTriangleReduction. |
|
Property | StackingAxis |
Gets or sets the StackingAxis. |
|
Property | StackingDefeatureSize |
Gets or sets the StackingDefeatureSize. |
|
Property | StretchFactorX |
Gets or sets the StretchFactorX. |
|
Property | StretchFactorY |
Gets or sets the StretchFactorY. |
|
Property | StretchFactorZ |
Gets or sets the StretchFactorZ. |
|
Property | SubsampleRate |
Gets or sets the SubsampleRate. |
|
Property | Suppressed |
Gets or sets the Suppressed. (Inherited from MeshControl.) |
|
Property | SurfaceMeshMethod |
Gets or sets the SurfaceMeshMethod. |
|
Property | SweepBiasType |
Gets or sets the SweepBiasType. |
|
Property | SweepBiasValue |
Gets or sets the SweepBiasValue. |
|
Property | SweepEdges |
Gets or sets the SweepEdges. |
|
Property | SweepElementSize |
Gets or sets the SweepElementSize. |
|
Property | SweepESizeType |
Gets or sets the SweepESizeType. |
|
Property | SweepNumberDivisions |
Gets or sets the SweepNumberDivisions. |
|
Property | SweepSizeBehavior |
Gets or sets the SweepSizeBehavior. |
|
Property | SweepThickness |
Gets or sets the SweepThickness in Multizone. |
|
Property | TargetLocation |
Gets or sets the TargetLocation. |
|
Property | TetraGrowthRate |
Gets or sets the TetraGrowthRate. |
|
Property | TriangleReduction |
Gets or sets the TriangleReduction. |
|
Property | UseSplitAngle |
Gets or sets the UseSplitAngle in Multizone. |
|
Property | WallThickness |
Gets or sets the WallThickness. |
|
Property | WriteICEMCFDFiles |
Gets or sets the WriteICEMCFDFiles. |