[1] P. Camanho and L. Lambert. A design methodology for mechanically fastened joints in laminated composite materials. Comp. Sci. Technol.. Vol. 66. pp. 3004-3020. 2006.

[2] P. Camanho, C. Davila, S. Pinho, I. Iannucci, and P. Robinson. Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear. Composites Part A: Applied Science and Manufacturing. Vol. 37. No. 2. pp. 165-176. 2006.

[3] R. Cuntze. Efficient 3D and 2D failure conditions for UD laminae and their application within the verification of the laminate design. Comp. Sci. Technol.. Vol. 66. No. 7-8. pp. 1081-1096. 2006.

[4] C. Davila, P. Camanho, and C. Rose. Failure Criteria for FRP Laminates. Journal of Composite Materials. Vol. 39. No. 4. 2005.

[5] Structural Materials Handbook. ECSS-HB-304. ESA2009ESA Publications Division. 2009.

[6] G. L. Ghiringhelli and P. Mantegazza. Linear, straight and untwisted anisotropic beam section properties from solid finite elements. Composites Engineering. Vol. 4. No. 12. pp. 1-13. 1994.

[7] V. Giavotto, M. Borri, P. Mantegazza, G. Ghiringhelli, V. Carmaschi, G. C. Maffioli, and F. Mussi. Anisotropic beam theory and applications. Computers & Structures. Vol. 16. No. 1-4. pp. 403-413. 1983.

[8] O. Hoffman. The Brittle Strength of Orthotropic Materials. Journal of Composite Materials. Vol. 1. pp. 200-206. 1967.

[9] A. Puck. Festigkeitsanalyse von Faser-Matrix-Laminaten. Carl Hanser. 1996.

[10] P.D. Soden, A.S. Kaddour, and M.J. Hinton. Recommendations for designers and researchers resulting from the world-wide failure exercise. Composites Science and Technology. Vol. 64. No. 3-4. pp. 589-604. March, 2004.