Review the Weighted Average values recorded for the Displacement transfer to verify that the displacements sent by Mechanical match those received by Fluent.
Tip: For cases run using System Coupling in Workbench, you can review the Transcript's Coupling Interfaces section to determine the quantity associated with each data transfer. For this tutorial, Data Transfer and Data Transfer 2 are the Force and Incremental Displacement transfers, respectively.
Figure 41: Displacement at Coupling Step 100, Iteration 4
+=============================================================================+ | COUPLING STEP = 100 SIMULATION TIME = 1.00000E-02 [s] | +=============================================================================+ +=============================================================================+ | COUPLING ITERATIONS | +-----------------------------------------------------------------------------+ | | Source Target | +-----------------------------------------------------------------------------+ ... +-----------------------------------------------------------------------------+ | COUPLING ITERATION = 4 | +-----------------------------------------------------------------------------+ ... +-----------------------------------------------------------------------------+ | Fluid Flow (Fluent) | | | Interface: CouplingInterface 1 | | | displacement | Converged | | RMS Change | 4.68E-04 4.81E-04 | | Weighted Average x | -1.03E-05 -1.03E-05 | | Weighted Average y | -1.02E-05 -1.02E-05 | | Weighted Average z | 1.55E-22 -5.02E-29 | +-----------------------------------------------------------------------------+