Removing a Junction

  1. Select an edge or face that belongs to one or more Full overlap, Partial overlap, or No overlap bend junctions.
  2. Ctrl+click to elect multiple edges.
  3. Select the None option from the Junction option tool.
    You can also right-click the edge or face and click in the junction mini-toolbar or select None as the Junction type in the Sheet Metal section of the Properties panel.
    The geometry at the junction will not change, but the junction will no longer be recognized by SpaceClaim. You may need to do this when you want to make changes that can't be made to a recognized junction, such as creating a partial flange.