Creating a Broken View with a Sketched Spline Break
- Click the Broken tool in the Detail tab Views group.
- Set the following options (remembered for the entire session):
Cut Direction: Horizontal, Vertical, or Aligned to Geometry.
Break Line: Set this to Freehand Spline Cut (Straight Cut is the other option)
Default Gap: Sets the initial gap between broken view pieces.
- Pick a location for the break. The spline sketch mode is now active.
- Sketch the spline and double-click to finish the spline.
- The break spline is shown in blue. If you want to sketch a different spline, you need to restart the tool.
- Pick a location for the second spline.
- The view is created with the default gap set in the Broken View Options.
- Press Esc or S to exit the tool.