Annotation Options
Default text height |
Specify the height of the annotation text. |
Leader circle size |
Specify the size of the circle that connects note leaders to faces. |
Leader arrow length |
Specify the length of the arrow on note leaders. |
Leader arrow width |
Specify the size of the arrowhead on note leaders. |
Leader shoulder length |
Specify the length of the line from the note text to the note leader arrow. |
Leader textbox gap |
Specify the size of the margin between the note text and the beginning of the note leader. |
Center line extend |
Specify the length that a center line will extend past the edge of the object. |
Default arrow fill style |
Select the style you want to use for the arrowheads on note leaders from the drop-down list. |
Default dimension arrow shape |
Select the shape you want to use for the arrowheads on dimensions and leaders from the drop-down list. |
Default dimension text location |
Select how you want to align the note leader text with the note leader line from the drop-down list. |
Fallback font |
Select the font you want to use if the new window font is not available. |
Default note space |
Select the default space for adding notes. The options available are View space (default) and Model space. Notes in the Model space are their true size and are not scaled based on the Detail scale setting. |
Virtual sharps rendering style |
Select the symbol you want to use to indicate the virtual sharp. |
Datum symbol frame |
Select the frame style for datum symbols. |
Datum symbol attachment |
Select the attachment style for datum symbols. |
Show thread designation in thread diameter |
Choose whether thread designations are shown instead of thread diameters:
|
Datum Callout text height ratio |
Controls how many times larger the callout circle should be compared to the text height. |
Datum Target default point size |
Controls the point size used by datum target points, lines, and circles. Default point size can be overridden on a per object basis. |
Datum Target area default hatch spacing |
Controls the hatch spacing for circular and rectangular datum targets. Default spacing can be overridden on a per object basis. |
Datum Target area default hatch angle |
Controls the hatch angle for circular and rectangular datum targets. The default angle can be overridden on a per object basis. |
Datum callout leader arrow shape |
Controls the arrow shape of leaders connected to datum targets. |
Welding symbols standard |
Choose either AWS or ISO. |
Enforce dimension line |
Check the box to use the European standard of keeping the dimension line when the extension lines are shown. |
Tight gap between dimension line and text |
Check the box to shrink the gap between the dimension text and witness lines. |
Horizontal dimension text |
Check the box to keep all annotation text oriented horizontally. |
Override layer color for annotations |
Check the box to set all annotation text to the color selected shown in the Annotation color control. If you choose to override the layer color, select the color used for the override from the Annotation color control. |
Extension line gap |
Specify the size of the margin between geometry and the end of dimension lines. |
Extension line extent |
Specify the length that the dimension lines cross each other. |
Dimension line extent |
Specify the length of the arrow that appears outside the dimension lines. |
Dimension text offset |
Specify the distance between the dimension text and its leader line. |
Foreshortened radial dimension center size |
Specify the size of the cross shown to represent the center. |
Default chamfer dimension style |
Choose either Linear or Normal to chamfer. |
Default chamfer dimension text format |
Choose between:
|
Show zero value for base ordinate dimension |
Display the baseline dimension as a 0. |
Show common dimension line for ordinate dimensions |
Display all dimensions along the same line. Check Rotate text if you want the dimensions to be displayed along the line instead of perpendicular to the line. |
Show datum target endpoints |
Show or hide the endpoint. |
Hide annotations behind model |
Allow solid geometry to hide annotations that are behind the geometry. For printing, set the Print as image to Yes in the Printing Options to show annotations as hidden in the print. |