Contents Designing » Editing » Pulling with the Pull Tool » Sweeping » Sweeping with an Axis to Set Orientation » Set Orientation by Sweeping an Axis ExamplesPrint pageSet Orientation by Sweeping an Axis Examples Setting the orientation of the selected object as it is swept along the trajectory. Variable sweep with axis. Every section plane that is cut through a point on the origin trajectory and through the selected axis has a profile section that is aligned to the vector defined by the O-X vector in that plane, scaled by the length of the O-X vector, and limited by the extents of the shortest trajectory. This makes every section appear to radiate around that selected axis. « Sweeping with an Axis to Set OrientationDrafting Faces »