*LOAD_BODY_X
Specifies gravitational or other acceleration loads in the x direction. The load is applied to all nodes in the model.
Card
LCID = ID of the load curve that represents the magnitude of the load (see *DEFINE_CURVE ).
SF = 1.0 (default), load curve scale factor.
LCIDDR = 0 (default), ID of load curve defined for dynamic relaxation.
XC = 0.0 (default), X-center of rotation needed for angular velocities.
YC = 0.0 (default), Y-center of rotation needed for angular velocities.
ZC = 0.0 (default), Z-center of rotation needed for angular velocities.
CID = ID of local coordinate system used. Set to 0 for the global coordinate system.
*LOAD_BODY_Y
Specifies gravitational or other acceleration loads in the y direction. The load is applied to all nodes in the model.
Card
(see *LOAD_BODY_X).
*LOAD_BODY_Z
Specifies gravitational or other acceleration loads in the z direction. The load is applied to all nodes in the model.
Card
(see *LOAD_BODY_X).