IC3M Functions

ic_rmi_ic3m_batch args

Runs IC3M in batch mode. The options are:

  • file : the path to the settings file

  • geom : 1 if the geometry for intake/exhaust valves should be created, 0 if not (default 1)

  • mesh : 1 if the mesh for intake/exhaust valves should be created, 0 if not (default 1)

  • comb : 1 if geometry/mesh for combustion dome should be created, 0 if not (default 1)

  • piston : 1 if geometry/mesh for piston bowl should be created, 0 if not (default 1)

  • output_to : starcd or fluent, if output mesh should be created (default none)

  • output : transient or steady_state, if output mesh to STAR-CD or Fluent should be created (default none)

Optional options: (overwrites the values from the settings file)

  • platform : output platform for the STAR-CD run

  • Possible values for platform : (default is value from the settings file)

    • sgi_m2

    • sgi64_m4

    • aix_generic

    • sun_generic

    • osf1

    • hp_generic

    • linux

  • precision : precision for that platform

  • Possible values for precision : (default is value from the settings file)

    • 1

    • 2

  • Only used if output mesh is set to steady_state : (defaults are values from the settings file)

    • angle_dca : angle DCA

    • use_cyl_len : if 1 use also cylinder length and number of cylinder layers:

      • cyl_length : cylinder length

      • nlayers_cyl : number of cylinder layers

Example usage: ic_rmi_ic3m_batchfile engine/test.def output_to starcd output transient