After the solution has converged, create the following post-processing objects:
| Object | Specifications | Description |
|---|---|---|
| cut.1 (plane cut) | Set position: Y plane through center | Plane cut (X-Z) view of the velocity vectors in the X-Z plane. |
| Show vectors | ||
| face.1 (object face) |
Object: pcb
| Object-face view of temperature on pcb. |
| Show contours / Parameters | Note the minimum and maximum temperatures as well as the temperature distribution. | |
| Calculated: This object | ||
| face.2 (object face) |
Object: pcb
| Object-face showing the thermal conductivity in the X direction, K_X. |
| Show contours / Parameters | ||
| Contours of : K_X |