Creates design points based on your settings. Choose from a list of sampling types, specify the number of samples, whether or not you want to remove existing design points, as well as upper and lower limits for your input parameters.

Generates an optiSLang-compatible output file to a location of your choice, containing the details of the updated design points.

Computes the number of designs of experiments, based on the sampling type designation and the number of levels.

Creates a copy of the optiSLang project from the simulation directory (*.opf), places it inside your working directory (as designated in the Fluent Launcher, and opens the copied project in optiSLang.

Lists the current settings for the automatically generated design points (for example, samping type, number of levels,number of samples, etc.).

Opens the optiSLang postprocessor using a generated optiSLang-compatible output file (located, by default, under the current simulation directory) containing the details of the updated design points.

Enters the print-to-console menu where you can manage settings for automatically creating design points for your parametric study.

Enter the optimization menu where you can set optiSLang-specific optimization methods and their various properties.

Stops the concurrent update of all design points.

Stops the concurrent update of the design point.

Refreshes the status of the design points that are being updated in the session, if any.

Prints the value for the Capture Simulation Report Data setting for the design point, where this field determines whether or not design point data is captured for the simulation report.

Prints the "current" design point.

Prints the value(s) for the input parameters of a design point.

Prints the value(s) for the output parameters of a design point.

Prints the status for all design points in the study.

Prints the status for the current design point in the study.

Prints the value for the Write Data setting for the design point (where the Write Data field determines how a design point writes its data upon update).

Sets the value for the Capture Simulation Report Data setting for the design point, where this field determines whether or not design point data is captured for the simulation report.

Sets the designated design point to be "current."

Sets the value(s) of the input parameters for a design point.

Sets the value for the Write Data setting for the design point (where the Write Data field determines how a design point writes its data upon update).

Export the contents of your design point table to an external .csv file.

Import the contents for your design point table from an external .csv file.

Removes the end point of the concurrent update of all design points.

Enter the licensing menu for concurrently updating the parametric study.

Enter the print-to-console menu for updating parametric studies using concurrent design points.

Registers a new end point for parametric studies using concurrent design points.

Enter the settings menu for parametric studies using concurrent design points.

Prints the method used for updating the study.

Sets the method used for updating design points.

Updates all design points in the parametric study.

Updates the design point set as "current" in the parametric study.

Updates a selection of design points in the parametric study.