Some physics conditions can be parameterized and are identified using the
icon.
Click the icon to parameterize the physics conditions. This icon may appear in the
- tree to the right of the condition
- semi-halo above the HUD.
Physics conditions are also listed in the Manage Physics Parameters panel. The
parameterization state of a condition can be controlled in the panel through simple selection
in the list.
Fluid Flow Parameters
Condition |
Constraints |
Inlet |
temperature, velocity, mass flow rate, pressure |
Outlet |
pressure, velocity, mass flow rate |
Walls |
convection temperature and coefficient, heat flow, heat flux,
temperature |
Solid Thermal Parameters
Condition |
Constraints |
Convection |
convection coefficient, external temperature |
Heat |
total heat volume, total heat area |
Temperature |
|
Structural Parameters
Condition |
Constraints |
Acceleration |
magnitude, components |
Bearing load: |
radial force, thrust |
Bolt preload |
|
Displaced support: |
displacement |
Displacement |
rotation, translation, remote point location (X/Y/Z) |
Force, distributed |
total force, force per unit area, remote point location (X/Y/Z) |
Force, torque |
magnitude |
Pressure |
magnitude |
Mass |
magnitude, remote point location (X/Y/Z) |
Moment |
|
Spring |
|
Velocity |
magnitude, components |
Electromagnetics Parameters
Condition |
Constraints |
Circuit port |
impedance, magnitude, phase |
Mode port |
impedance, magnitude, phase |