Drawing a Tangent Arc
-
Click
Tangent Arc in the Sketch
group.
The tool is disabled if there are no curves or lines in the sketch plane.
- Select the line or curve you want to draw tangent to.This is usually the end point of a line, arc, or spline, but it can be on the line. If two lines share an end point, use the scroll wheel to set tangency to the other line.
- (Optional) Dimension the radius and chord angle.
- Click to set the end point of the arc.The arc cannot end on its start point to make a circle or end on the same line as its start point.
The common sketch options are described in Sketch Tool Guides and Options.