[1] Akinci et al.. Versatile surface tension and adhesion for SPH fluids.. ACM Trans. Graph. 32, 6, Article 182. 8 pages. 2013.

[2] Gimenez, C. S. and Finke, B. and Nowak, C. and Schilde, C. and Kwade, A. Structural and mechanical characterization of lithium-ion battery electrodes via {DEM} simulations. Advanced Powder Technology. 29. 2312-2321. 2018.

[3] Potyondy, D. O. and Cundall, P. A.. A bonded-particle model for rock. International Journal of Rock Mechanics & Mining Sciences. 41. 1329-1364. 2004.

[4] Smith, IWi. The combustion rates of coal chars: a review. Symposium (International) on combustion. 19. 1045-1065. 1982.

[5] Nicoud, Lucrèce and Licordari, Filippo and Myerson, Allan S. Estimation of the solubility of metastable polymorphs: a critical review. Crystal Growth & Design. 18. 7228-7237. 2018.

[6] Dhole, S.D. and Chhabra, R.P. and Eswaran, V.. Flow of power-law fluids past a sphere at intermediate Reynolds numbers. Industrial & Engineering Chemistry Research. . . 2006.

[7] Bird, R.B. and Armstrong, R.C. and Hassager, O.. Dynamics of polymeric liquids. John Wiley & Sons. . . 1987.

[8] Dazhi, G. and Tanner, R.I.. The drag on a sphere in a power-law fluid. Journal of Non-Newtonian Fluid Mechanics. . . 1985.

[9] Wang, Zekun and Liu, Moubin and Yang, Xi. A four-way coupled CFD-DEM modeling framework for charged particles under electrical field with applications to gas insulated switchgears. Powder Technology. 373. 433-445 . 2020.

[10] . ANSYS\textsuperscript{\tiny\textregistered} Fluent, Release 2019 R3, Help System, Theory Guide. ANSYS, Inc.. 29=019.

[11] Svoboda, J. Extraction of ferromagnetic particles by a suspended magnet. Magnetic and Electrical Separation. 4. 223-239. 1993.

[12] Tom Leblicq and Bart Smeets and Simon Vanmaercke and Herman Ramon and Wouter Saeys. A discrete element approach for modelling bendable crop stems. Computers and Electronics in Agriculture. 124. 141-149. 2016.

[13] Pasha, M. and Dogbe, S. and Hare, C. and Hassanpour, A. and Ghadiri, M.. A linear model of elasto-plastic and adhesive contact deformation. Granular Matter. 16. 151-162. 2014.

[14] Massih Pasha. Modelling of flowability measurement of cohesive powders using small quantities. PhD Thesis. University of Leeds. 2013.

[15] Mikami, T. and Kamiya, H. and Horio, M.. Numerical simulation of cohesive powder behavior in a fluidized bed. Chemical Engineering Science. 53. 1927-1940. 1997.

[16] Nase, S. T. and Vargas, W. L. and Abatan, A. A. and McCarthy, J. J.. Discrete characterization tools for cohesive granular material. Powder Technology. 116. 214-223. 2001.

[17] Vasilakis, Andrew. The Lorentz force law and Maxwell's equations in symmetric form. International Journal of Mathematical Education in Science and Technology. 67. 443-446. 1994.

[18] Chikazumi, S. Physics of Ferromagnetism. . 197.

[19] Carlo A. Gonano*, Riccardo E. Zich, and Marco Mussetta. Definition for Polarization P and Magnetization M Fully Consistent with Maxwell’s Equations. Progress In Electromagnetics Research. 64. 83–101. 2015.

[20] . Contact radius and curvature corrections to the nonlocal contact formulation accounting for multi-particle interactions in elastic confined granular systems. International Journal of Engineering Science. 133. 26–46. 2018.

[21] Y. Bommireddy, A. Agarwal, V. Yettella, V. Tomar, and M. Gonzalez. Loading-unloading contact law for micro-crystalline cellulose particles under large deformations. arXiv:1812.06173. arXiv preprint. . 2018.

[22] Flemmer, R. L. C. and Banks, C. L.. On the Drag Coefficient of a Shape. Powder Technology. 48. 217-221. 1986.

[23] Pritchard, Philip J.. Fox and McDonald's Introduction to Fluid Mechanics. John Wiley & Sons. 2011.

[24] Crowe, C.T. and Schwarzkopf, J.D. and Sommerfeld, M. and Tsuji, Y.. Multiphase Flows with Droplets and Particles, Second Edition. Taylor & Francis. 2011.

[25] . Ansys\textsuperscript{\tiny\textregistered} Fluent, Release 2019 R3, Help System, User's Guide. Ansys, Inc.. 2019.

[26] . Ansys\textsuperscript{\tiny\textregistered} Fluent, Release 2019 R3, Help System, Customization Manual. Ansys, Inc.. 2019.

[27] . Ansys\textsuperscript{\tiny\textregistered} CFX, Release 2019 R3, Help System, Theory Guide. Ansys, Inc.. 2019.

[28] Unland, Georg and Szczelina, Piotr. Coarse crushing of brittle rocks by compression. International Journal of Mineral Processing. 74. . 2004.

[29] Huilin, Lu and Gidaspow, Dimitri. Hydrodynamics of binary Fluidization in a riser: CFD simulation using two granular temperatures. Chemical Engineering Science. 58. 3777-3792. 2003.

[30] Gidaspow, D.. Multiphase Flow and Fluidization. Academic Press. 1994.

[31] Ergun, Sabri. Fluid flow through packed columns. Chem. Eng. Prog.. 48. 89-94. 1952.

[32] Gidaspow, D.. Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. Elsevier Science. 2012.

[33] Gidaspow, Dimitri and Bezburuah, Rukmini and Ding, J.. Hydrodynamics of Circulating Fluidized Beds: Kinetic Theory Approach. Engineering foundation conference on fluidization. 7. 75-82. 1993.

[34] Wen, C.Y. and Yu, Y.H.. Mechanics of Fluidization. The Chemical Engineering Progress Symposium Series. 162. 100-111. 1966.

[35] Bergman, T. and Incropera, F. and Dewitt, D. and Lavine, A.. Fundamentals of Heat and Mass Transfer. Wiley. . . 2011.

[36] E., M.. Particles, Bubbles & Drops: Their Motion, Heat and Mass Transfer. World Scientific Publishing Company. . . 2006.

[37] Schwager, T. and Becker, V. and Pöschel, T.. Coefficient of tangential restitution for viscoelastic spheres. The European Physical Journal E. . . 2008.

[38] Christoph Gissler and Stefan Band and Andreas Peer and Markus Ihmsen and Matthias Teschner. Generalized drag force for particle-based simulations. Computers & Graphics. 69. 1-11. 2017.

[39] O'Rourke, P J and Amsden, A A. The TAB method for numerical calculation of spray droplet breakup. . . . 1987.

[40] Liu, Alex B. and Mather, Daniel and Reitz, Rolf D.. Modeling the Effects of Drop Drag and Breakup on Fuel Sprays. International Congress & Exposition. SAE International. . . 1993.

[41] O'Rourke, Peter J. and Amsden, Anthony A.. The Tab Method for Numerical Calculation of Spray Droplet Breakup. 1987 SAE International Fall Fuels and Lubricants Meeting and Exhibition. . . 1987.

[42] Giannis, K. and Schilde, C. and Finke, J. and Kwade, A. and Caligueta, M. and Taghizadeh, K. and Luding, S.. Stress based multi-contact model for discrete-element simulations. Granular Matter. . . 2021.

[43] Tatara, Y.. Extensive theory of force-approach relations of elastic spheres in compression and in impact. J. Eng. Mater. Technol.. 111. 163–168. 2021.

[44] Schmidt, M.. Modellierung der Zerkleinerung in Profilwalzenbrechern. Technischen Universität Bergakademie Freiberg. 2011.

[45] Bergman, T. L. and Lavine, A. S. and Incropera, F. P. and Dewitt, D. P.. Radiation Exchange between Surfaces. . . 861-931. .

[46] Bergman, T. L. and Lavine, A. S. and Incropera, F. P. and Dewitt, D. P.. Fundamentals of Heat and Mass Transfer. Wiley & Sons. 2011.

[47] Hou, Q. and Gan, J. and Zhou, Z. and Yu, A.. Particle Scale Study of Heat Transfer in Packed and Fluidized Beds. Advances in Chemical Engineering. 46. 2015.

[48] Chen, J. C. and Grace, J.R. and Golriz, M. R.. Heat transfer in fluidized beds: design method. Powder Technology. 150. 123-132. 2005.

[49] Felske, J. D.. Approximate Radiation Shape Factors between Two Spheres. Journal of Heat Transfer. 100. 547-548. 1978.

[50] Hauptmann, E.G.. Angle Factors between a Small Flat Plate and a Diffusely Radiating Sphere. American Institute of Aeronautics and Astronautics (AIAA) Journal. 6. 938-939. 1967.

[51] Hoghe, M. D. and Calle, C. I. and Curry, D. R.and Weitzman P. S.. Discrete element modeling ({DEM}) of triboelectrically charged particles: Revised experiments. Journal of Electrostatics. 67. 691-694. 2009.

[52] Wu, C. and Li, L. and Thornton, C.. Rebound behaviour of spheres for plastic impacts. International Journal of Impact Engineering. 28. 929–946. 2003.

[53] S. M. Hosseini, M. T. Manzari, and S. K. Hannani. A fully explicit three-step SPH algorithm for simulation of non-newtonian fluid flow.. International Journal of Numerical Methods for Heat and Fluid Flow. 17. 715-735. 2006.

[54] M. Ihmsen, J. Cornelis, B. Solenthaler, C. Horvath, and M. Teschner. Implicit incompressible SPH.. IEEE Transactions on Visualization and Computer Graphics. 20. 426-435. 2014.

[55] Q. Zhang, L. Dor, A. K. Biswas, W. Yang and W. Blasiak. Modeling of steam plasma gasification for municipal solid waste.. Fuel Processing Technology. 106. 546-554. 2013.

[56] S. Wang and Y. Shen. CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace.. Fuel. 302. 2021.