VMR027-3B

VMR027-3B
2D Plane Stress - Biaxial (negative) Displacement Secondary Creep

Test Description

A square of length L and height L is constrained in the Y-direction on the bottom edge and constrained in the X-direction on the left edge. The model is displaced in the X-direction by u₁ and in the Y-direction by u₂

Geometic Properties

Material Properties

L = 100 mm

Boundary Conditions

Top Edge: u_y = -0.1, Bottom Edge: u_y = 0

Right Edge: u_x = 0.1, Left Edge: u_x = 0

E = 200 x 10³ N/mm²

ν = 0.3

Creep: ε = Aσⁿt^m

n = 5

No applied forces

Results

Results are tabulated and displayed as in the NAFEMS manual.


             |   Mechanical APDL   |   RATIO  |         INPUT         |
  
 SHELL181
  ECR6X                7.976            1.0318     vmr027-cr3b-181
 PLANE182
  ECR6X                7.976            1.0318     vmr027-cr3b-182
 PLANE183
  ECR6X                7.976            1.0318     vmr027-cr3b-183
 SHELL281
  ECR6X                7.976            1.0318     vmr027-cr3b-281
  
 ----------------------------------------------------------------------