The calibration process is complete when you have obtained values for SSF and ASCs that are within an acceptable level of error between measured and simulated distortion. Because the goals of every company and the design of every manufactured part are unique, it is up to you to decide what is an acceptable level of error. Record the final values in the Results Summary sheet in the spreadsheet. Then use those new values of SSF and ASCs for all your simulations in Additive Print for that machine and material.
Note: The remaining content of this chapter is accessible for licensed users with Ansys credentials. If you already have an Ansys account, log in by clicking CUSTOMER LOGIN in the upper right corner of the help page. If not, contact your local Ansys support provider to learn about license options.