Defines a AutomaticMethod.
Declaration Syntax
public class AutomaticMethod : MeshControl
Table 847: Members
|
Property | Active |
Gets the Active. |
|
Property | AggressiveInflateOption |
Gets or sets the AggressiveInflateOption. |
|
Property | AggressiveTetImprovement |
Gets or sets the AggressiveTetImprovement. |
|
Property | Algorithm |
Gets or sets the Algorithm. |
|
Property | ApproximativeNumberOfElementsPerPart |
Gets or sets the ApproximativeNumberOfElementsPerPart. |
|
Property | AutoCollapseShortEdges |
Gets or sets the AutoCollapseShortEdges. |
|
Property | AutomaticNodeMovement |
Gets or sets the AutomaticNodeMovement method under PCTet. |
|
Property | AutoPinchFaces |
Gets or sets the AutoPinchFaces. |
|
Property | AutoPinchTolerance |
Gets or sets the AutoPinchTolerance. |
|
Property | AutoRemoveThinFaces |
Gets or sets the AutoRemoveThinFaces. |
|
Property | AutoRepairFeatureAngle |
Gets or sets the AutoRepairFeatureAngle. |
|
Property | AutoRepairPartialDefeature |
Gets or sets the AutoRepairPartialDefeature. |
|
Property | AutoSharpAngle |
Gets or sets the AutoSharpAngle. |
|
Property | AutoShortEdgeLength |
Gets or sets the AutoShortEdgeLength. |
|
Property | AutoThinFaceWidth |
Gets or sets the AutoThinFaceWidth. |
|
Property | BFCartSubType |
Gets the BFCartSubType. |
|
Property | BFCartTolerance |
Gets the BFCartTolerance. |
|
Property | BodyStackingType |
Gets or sets the BodyStackingType. |
|
Property | CartesianSize |
Gets or sets the CartesianSize in Multizone. |
|
Property | CartSweepSpacingOption |
Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points). |
|
Property | Children |
Gets the list of children. (Inherited from MeshControl.) |
|
Property | Clearence |
Gets or sets the Clearence. |
|
Property | Comments |
Gets the list of associated comments. (Inherited from MeshControl.) |
|
Property | ConstrainBoundary |
Gets or sets the ConstrainBoundary. |
|
Property | ControlMessages |
Gets the ControlMessages. |
|
Property | CoordinateSystem |
Gets or sets the CoordinateSystem. |
|
Property | CornerAngle |
Gets or sets the CornerAngle. |
|
Property | CurvatureNormalAngle |
Gets or sets the CurvatureNormalAngle. |
|
Property | DataModelObjectCategory |
Gets the current DataModelObject's category. |
|
Property | DecompositionType |
Gets or sets the DecompositionType in Multizone. |
|
Property | DefeatureLayerVolume |
Gets or sets the DefeatureLayerVolume. |
|
Property | DefeaturingTolerance |
Gets or sets the DefeaturingTolerance. |
|
Property | DefinedBy |
Gets or sets the DefinedBy. |
|
Property | ElementMidsideNodes ***OBSOLETE*** Use the ElementOrder property instead. |
Gets or sets the ElementMidsideNodes. |
|
Property | ElementOption |
Gets or sets the ElementOption. |
|
Property | ElementOrder |
Gets or sets the ElementOrder. |
|
Property | FaceProximityGapFactor |
Gets or sets the FaceProximityGapFactor for PCTet. |
|
Property | FallBackMeshType |
Gets or sets the FallBackMeshType. |
|
Property | FeatureAngle |
Gets or sets the FeatureAngle. |
|
Property | FeatureProtectionAngle |
Gets or sets the DihedralAngle for AutoNodeMove under PCTet. |
|
Property | Figures |
Gets the list of associated figures. (Inherited from MeshControl.) |
|
Property | FilletCollapse |
Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ). |
|
Property | FillingDirection |
Gets or sets the FillingDirection. |
|
Property | FillingFraction |
Gets or sets the FillingFraction. |
|
Property | FreeFaceMeshType |
Gets or sets the FreeFaceMeshType. |
|
Property | FreeMeshType |
Gets or sets the FreeMeshType. |
|
Property | GenerateLayersUsingFacets |
Gets or sets the GenerateLayersUsingFacets. |
|
Property | Images |
Gets the list of associated images. (Inherited from MeshControl.) |
|
Property | ImprovementIterations |
Gets or sets the ImprovementIterations for AutoNodeMove under PCTet. |
|
Property | InflateRelativeTolerance |
Gets or sets the InflateRelativeTolerance. |
|
Property | InternalObject |
Gets the internal object. For advanced usage only. |
|
Property | KeyPointsSelection |
Gets or sets the KeyPointsSelection. |
|
Property | KeyPointsTolerance |
Gets or sets the KeyPoints Tolerance in Multizone. |
|
Property | LateralDefeatureSize |
Gets or sets the LateralDefeatureSize. |
|
Property | LayerHeight |
Gets or sets the LayerHeight. |
|
Property | LayerStart |
Gets or sets the LayerStart. |
|
Property | Location |
Gets or sets the Location. |
|
Property | MappedSweptType |
Gets or sets the MappedSweptType. |
|
Property | MatchMeshWherePossible |
Gets or sets the MatchMeshWherePossible. |
|
Property | MaximumElementSize |
Gets or sets the MaximumElementSize. |
|
Property | MeshBasedDefeaturing |
Gets or sets the MeshBasedDefeaturing. |
|
Property | MeshFlowControl |
Gets or sets the MeshFlowControl. |
|
Property | MeshInCenter |
Gets or sets the MeshInCenter. |
|
Property | MeshType |
Gets or sets the MeshType. |
|
Property | MeshUsingVoxelization |
Gets or sets the MeshUsingVoxelization. |
|
Property | Method |
Gets or sets the Method. |
|
Property | MinimumEdgeLength |
Gets the MinimumEdgeLength. |
|
Property | MinimumSizeLimit |
Gets or sets the MinimumSizeLimit. |
|
Property | MinimumThickness |
Gets or sets the MinimumThickness for PCTet. |
|
Property | MZSweepNumberDivisions |
No details are provided for this entry. |
|
Property | NamedSelection |
Gets or sets the NamedSelection. |
|
Property | NumberOfCellsAcrossGap |
Gets or sets the NumberOfCellsAcrossGap. |
|
Property | NumberOfElementLayers |
Gets or sets the NumberOfElementLayers for PCTet. |
|
Property | OverlappingAngle |
Gets or sets the OverlappingAngle. |
|
Property | PartialFill |
Gets or sets the PartialFill. |
|
Property | ParticleCoordinateSystem |
Gets or sets the ParticleCoordinateSystem. |
|
Property | ParticleDiameter |
Gets or sets the ParticleDiameter. |
|
Property | PreserveBoundaries |
Gets or sets the PreserveBoundaries. |
|
Property | PrimeMethodAutoRepair |
Gets or sets the PrimeMethodAutoRepair. |
|
Property | ProjectCornersToTop |
Gets or sets the ProjectCornersToTop. |
|
Property | ProjectInConstantZPlane |
Gets or sets the ProjectInConstantZPlane. |
|
Property | ProjectionFactor |
Gets or sets the ProjectionFactor. |
|
Property | RadialGrowthRate |
Gets or sets the RadialGrowthRate. |
|
Property | RefineAtThinSection |
Gets or sets the RefineAtThinSection for PCTet. |
|
Property | Refinement |
Gets or sets the Refinement. |
|
Property | RefineSurfaceMesh |
Gets or sets the RefineSurfaceMesh for PCTet. |
|
Property | RelativeTolerance |
Gets or sets the PrimeRelativeTolerance. |
|
Property | RemoveSharpAngleFaces |
Gets or sets the RemoveSharpAngleFaces. |
|
Property | RepairFacets |
Gets or sets the RepairFacets. |
|
Property | RestrictNodeMovementsToSurface |
Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet. |
|
Property | ReuseBlocking |
Gets or sets the ReuseBlocking. |
|
Property | ScopingMethod |
Gets or sets the ScopingMethod. (Inherited from MeshControl.) |
|
Property | ShowAdvancedImproveOptions |
Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet. |
|
Property | SlicerFeatureAngle |
Gets or sets the SlicerFeatureAngle. |
|
Property | SliverTriangleHeight |
Gets or sets the SliverTriangleHeight. |
|
Property | SmoothMeshSpacing |
Gets or sets the SmoothMeshSpacing in Multizone. |
|
Property | SmoothTransition |
Gets or sets the SmoothTransition. |
|
Property | SolidShellElementForStacker |
Gets or sets the SolidShellElementForStacker. |
|
Property | SolidShellElementForStackerGeometrySelection |
Gets or sets the SolidShellElementForStackerGeometrySelection. |
|
Property | SolidShellElementForStackerNamedSelection |
Gets or sets the SolidShellElementForStackerNamedSelection. |
|
Property | SolidShellElementForStackerScopingMethod |
Gets or sets the SolidShellElementForStackerScopingMethod. |
|
Property | SourceLocation |
Gets or sets the SourceLocation. |
|
Property | SourceTargetSelection |
Gets or sets the SourceTargetSelection. |
|
Property | SpacingOption |
Gets or sets the SpacingOption. |
|
Property | SplitAngle |
Gets or sets the SplitAngle in Multizone. |
|
Property | StackerCoordinateSystem |
Gets or sets the StackerCoordinateSystem. |
|
Property | StackerFreeFaceMeshType |
Gets or sets the StackerFreeFaceMeshType. |
|
Property | StackerTriangleReduction |
Gets or sets the StackerTriangleReduction. |
|
Property | StackingAxis |
Gets or sets the StackingAxis. |
|
Property | StackingDefeatureSize |
Gets or sets the StackingDefeatureSize. |
|
Property | StretchFactorX |
Gets or sets the StretchFactorX. |
|
Property | StretchFactorY |
Gets or sets the StretchFactorY. |
|
Property | StretchFactorZ |
Gets or sets the StretchFactorZ. |
|
Property | SubsampleRate |
Gets or sets the SubsampleRate. |
|
Property | Suppressed |
Gets or sets the Suppressed. (Inherited from MeshControl.) |
|
Property | SurfaceMeshMethod |
Gets or sets the SurfaceMeshMethod. |
|
Property | SweepBiasType |
Gets or sets the SweepBiasType. |
|
Property | SweepBiasValue |
Gets or sets the SweepBiasValue. |
|
Property | SweepEdges |
Gets or sets the SweepEdges. |
|
Property | SweepElementSize |
Gets or sets the SweepElementSize. |
|
Property | SweepESizeType |
Gets or sets the SweepESizeType. |
|
Property | SweepNumberDivisions |
Gets or sets the SweepNumberDivisions. |
|
Property | SweepSizeBehavior |
Gets or sets the SweepSizeBehavior. |
|
Property | SweepThickness |
Gets or sets the SweepThickness in Multizone. |
|
Property | TargetLocation |
Gets or sets the TargetLocation. |
|
Property | TetraGrowthRate |
Gets or sets the TetraGrowthRate. |
|
Property | TriangleReduction |
Gets or sets the TriangleReduction. |
|
Property | UseSplitAngle |
Gets or sets the UseSplitAngle in Multizone. |
|
Property | WallThickness |
Gets or sets the WallThickness. |
|
Property | WriteICEMCFDFiles |
Gets or sets the WriteICEMCFDFiles. |