An enumeration of the different variable types supported by the tabular data (See Ansys.Mechanical.Interfaces.IDataSeries) implementation "Ansys.ACT.Automation.Mechanical.Table.Column".
Declaration Syntax
public enum VariableType
Table 1103: Members
|
Member |
BodyForceDensity |
Represents a Body Force Density as a dependent variable column with unit fundamentals [mass length^-2 time^-2], such as ‘N m^-3’ or ‘lbf ft^-3’. |
|
Member |
Displacement |
Represents a Displacement as a dependent variable column with unit fundamentals [length], such as ‘m’ or ‘ft’. |
|
Member |
ElementId |
Represents Element IDs as a field (independent) variable column. This column type has no units. |
|
Member |
Force |
Represents a Force as a dependent variable column with unit fundamentals [mass length time^-2], such as ‘N’ or ‘lbf’. |
|
Member |
HeatFlux |
Represents a Heat Flux as a dependent variable column with unit fundamentals [mass time^-3], such as ‘W m^-2’ or ‘BTU s^-1 ft^-2’. |
|
Member |
HeatGeneration |
Represents a Heat Generation as a dependent variable column with unit fundamentals [mass length^-1 time^-3], such as ‘W m^-3’ or ‘BTU s^-1 ft^-3’. |
|
Member |
HeatRate |
Represents a Heat Rate as a dependent variable column with unit fundamentals [mass length^2 time^-3], such as ‘W’ or ‘BTU s^-1. |
|
Member |
HeatTransferCoefficient |
Represents a Heat Transfer Coefficient as a dependent variable column with unit fundamentals [mass temperature^-1 time^-3] or equivalent, such as ‘W m^-2 C^-1’ or ‘lbf s^-1 ft^-1 R^-1’. |
|
Member |
NodeId |
Represents Node IDs as a field (independent) variable column. This column type has no units. |
|
Member |
OrientationAngle |
Represents a Orientation Angle as a dependent variable column with unit fundamentals [angle], such as ‘degree’ or ‘radian’. |
|
Member |
Pressure |
Represents a Pressure as a dependent variable column with unit fundamentals [mass length^-1 time^-2], such as ‘Pa’ or ‘psi’. |
|
Member |
Strain |
Represents a Strain as a dependent variable column. This column type has no units. |
|
Member |
Stress |
Represents a Stress as a dependent variable column with unit fundamentals [mass length^-1 time^-2], such as ‘MPa’ or ‘psi’. |
|
Member |
Temperature |
Represents a Temperature as a dependent variable column with unit fundamentals [temperature], such as ‘C’ or ‘F’. |
|
Member |
Thickness |
Represents a Thickness as a dependent variable column with unit fundamentals [length], such as ‘m or ‘ft. |
|
Member |
UserField |
Represents a user field variable which will be identified by the UserFieldVariable on a ColumnarDataImportDefinition. |
|
Member |
Velocity |
Represents a Velocity as a dependent variable column with unit fundamentals [length time^-1], such as ‘m s^-1’ or ‘ft s^-1’. |
|
Member |
Volume |
Represents a Volume as a dependent variable column with unit fundamentals [volume length^3], such as ‘m^3’ or ‘ft^3’. |
|
Member |
XCoordinate |
Represents the X location as a field (independent) variable column with unit fundamentals [length], such as ‘m’ or ‘ft’. |
|
Member |
YCoordinate |
Represents the Y location as a field (independent) variable column with unit fundamentals [length], such as ‘m’ or ‘ft’. |
|
Member |
ZCoordinate |
Represents the Z location as a field (independent) variable column with unit fundamentals [length], such as ‘m’ or ‘ft’. |