Optical Part Design
Known Issue |
Workaround or Solution |
---|---|
Freeform Lens: In some case, you may have a collimating lens providing inaccurate results. This may be due to different factors: the lens' surface may be too close to the source and the size of the lens aperture may be incorrectly defined. (TFS 817681) | Try modifying the distance between the source and the lens' surface, and the lens' aperture. |
When the Progress bar seems to be blocked, it may correspond to a sub-operation on the modeler that cannot be precisely monitored. (TFS 702752) | |
Opening an Optical Part Design project in two different Speos versions may present different results. (TFS 202587) | |
Settings defined from the SpaceClaim Display tab are not kept after the recompute of an OPD feature. (TFS 569412) | |
Optical Lens: When using script (only), the assignment of ID on faces is reverted between freestyle and non-freestyle Optical Lens, causing different selections. (TFS 599871) | |
Optical Surface: When using script (only), the assignment of ID on faces is reverted between freestyle and non-freestyle Optical Surface, causing different selections. (TFS 599871) | |
Link between OPD features and other Speos features are not necessarily preserved for some elements’ faces that have specific statuses (example: sewing faces of the Optical Surface, back face of the Optical Lens, etc.). | Recreate the links when necessary. |
There is a current known problem with the curvature orientation (concave/convex) where stripes curvature can be inverted.(358255) |
|
Some performance issues might slow down the light guide generation. (202139) |
|
When prisms have the exact same width as the light guide's width, some prisms might fail to build. (TFS 238577 - SF 26584) |
Decrease the prisms width (even of 0.001mm) and rebuild the feature. |
The Style Override mode (Transparent or Opaque) is not kept when modifying and updating the feature. (TFS 202120) |