CPAR: Define Parameter Compensator

CPAR is used to define the surface number and parameter number of the compensator to use for tolerance analysis. Int1 is used to specify the surface, and Int2 is used to define the parameter number. For example, to specify parameter 2 of surface 5 is a compensator, use CPAR with Int1 = 5, Int2 = 2.

The help topic for each surface type contains its parameter numbers. These can be found in the Sequential Surfaces section.

Also, see General Comments About Min & Max Values on Compensators.

Next:

• MPVT: Define Mechanical Pivot Point