Nastran
The following properties can be exported to Nastran, depending on which record you are exporting and which model you select.
Note: This feature is only available in Level 3 databases of
Granta EduPack 2026 R1.
Note: Only compatible with Nastran.
MaterialUniverse
- Compressive strength
- Density
- Density with temperature
- Mechanical loss coefficient (tan delta)
- Poisson's ratio
- Shear modulus
- Shear strength
- Thermal expansion coefficient
- Thermal expansion coefficient with temperature
- True plastic stress-strain
- Yield strength (elastic limit)
- Yield strength with temperature
- Young's modulus
- Young's modulus with temperature
Global Polymers Plastics
- CLTE, Flow
- CLTE, Flow (TMA)
- CLTE, Transverse
- Coeff of Thermal Expansion vs. Temperature
- Compressive Strength
- Density
- Density vs. Temperature
- Poisson's Ratio
- Poisson's Ratio vs. Temperature
- Shear Modulus
- Shear Modulus vs. Temperature
- Shear Modulus vs. Temperature, Dynamic
- Shear Strength
- Tensile Modulus
- Tensile Modulus vs. Temperature
- Tensile Modulus vs. Temperature, Dynamic
- Tensile Strength at Yield
- Tensile Strength at Yield (Elastomers)
- Tensile Strength at Yield MD (Films)
- Tensile Strength at Yield vs. Temperature
- True Stress vs. Plastic Strain
MMPDS
- Comp Yield Strength, L
- Comp. Yield Stress (L-dir) with Temp.
- Density
- Modulus, L
- Poisson's Ratio (L-dir) with Temp.
- Poisson's Ratio, L
- Shear Modulus (in-plane L-LT) with Temp.
- Shear Modulus, L
- Shear Yield Strength
- Tens. Yield Stress (L-dir) with Temp.
- Tensile Modulus (L-dir) with Temp.
- Tensile Stress/Strain, L
- Thermal Expansion
- Thermal Expansion with Temp.
- Yield Strength, L