ABAQUS
The following properties can be exported to ABAQUS, depending on which data table you are exporting from, and which model you select.
Note: Only compatible with ABAQUS 6.
MaterialUniverse
- Density
- Density with temperature
- Dielectric constant (relative permittivity)
- Electrical conductivity
- Electrical conductivity with temperature
- Electrical resistivity
- Poisson's ratio
- Specific heat capacity
- Specific heat capacity with temperature
- Thermal conductivity
- Thermal conductivity with temperature
- Thermal expansion coefficient
- Thermal expansion coefficient with temperature
- Thermal expansion coefficient with temperature_Reference Temp
- True plastic stress-strain
- Yield strength (elastic limit)
- Yield strength with temperature
- Young's modulus
- Young's modulus with temperature
ASME BPVC
- Density
- Min. yield strength
- Moduli of elasticity
- Poisson's ratio
- Thermal conductivity
- Thermal expansion
- Yield strength
ESDU MMDH
- 0.2% proof stress, tension (L)
- 0.2% proof stress, tension vs. Temperature (L)
- Coefficient of thermal expansion vs. Temperature
- Density
- Electrical conductivity vs. Temperature
- Poisson's Ratio (L)
- Specific heat capacity vs. Temperature
- Thermal conductivity vs. Temperature
- Young's modulus, tension (L)
- Young's modulus, tension vs. Temperature (L)
Global Metals Specifications
- Density
- Specific heat capacity (true) with temp.
- Thermal conductivity with temp.
- Thermal expansion coefficient (linear, mean) with temp.
- Yield strength
- Young's modulus
- Young's modulus with temperature
Global Polymers Plastics
- CLTE, Flow
- CLTE, Flow (TMA)
- CLTE, Transverse
- Coeff of Thermal Expansion vs. Temperature
- Density
- Density vs. Temperature
- Dielectric Constant 1 to 999 GHz
- Dielectric Constant 1 to 999 Hz
- Dielectric Constant 1 to 999 kHz
- Dielectric Constant 1 to 999 MHz
- Poisson's Ratio
- Poisson's Ratio vs. Temperature
- Specific Heat Capacity
- Specific Heat Capacity vs. Temperature
- Tensile Modulus
- Tensile Modulus vs. Temperature
- Tensile Modulus vs. Temperature, Dynamic
- Tensile Strength at Yield
- Tensile Strength at Yield (Elastomers)
- Tensile Strength at Yield (Films)
- Tensile Strength at Yield MD (Films)
- Tensile Strength at Yield TD (Films)
- Tensile Strength at Yield vs. Temperature
- Thermal Conductivity
- Thermal Conductivity vs. Temperature
- True Stress vs. Plastic Strain
- Volume Resistivity
- Volume Resistivity (Cured)
- Volume Resistivity vs. Temperature
High Temperature Alloy Data
- 0.2% Yield strength
- Density
- Material name
- Mean coefficient of thermal expansion
- Poisson's ratio
- Specific heat capacity
- Static modulus of elasticity
- Thermal conductivity
- True stress vs plastic strain
JAHM Curve Data
Temperature-dependent properties:
- Density
- Elastic modulus
- Electrical conductivity
- Poisson's ratio
- Specific heat capacity
- Thermal conductivity
- Thermal expansion (mean)
- Thermal expansion (mean)_Reference temperature
- True stress-strain (compression)
- True stress-strain (tension)
- Yield strength (compression)
- Yield strength (tension)
MMPDS-2024
- Density
- Electrical Conductivity
- Modulus, L
- Poisson's Ratio (L-dir) with Temp.
- Poisson's Ratio, L
- Specific Heat
- Specific Heat with Temp.
- Tens. Yield Stress (L-dir) with Temp.
- Tensile Modulus (L-dir) with Temp.
- Tensile Stress/Strain, L
- Thermal Conductivity
- Thermal Conductivity with Temp.
- Thermal Expansion
- Thermal Expansion with Temp.
- Yield Strength, L
Sheet Steels
- Density
- Poisson's ratio
- True stress vs Plastic strain
- Young's modulus (nominal)