Ansys Granta MI Pro

The following attributes can be exported to Granta MI Pro, depending on which data table you are exporting from, and which model you select.

Data is exported to a text file, and converted to consistent SI units.

If engineering stress-strain is used in a datasheet, it will be converted to true plastic stress-strain. (This requires a tensile modulus value at the temperature of each exported stress-strain curve.)

MaterialUniverse™

  • Core loss (by weight)
  • Core loss coefficients (power ferrite model, electrical steel model)
  • Density
  • Density with temperature
  • Dielectric constant (relative permittivity)
  • Dielectric loss tangent (Df) with frequency
  • Dissipation factor (dielectric loss tangent)
  • Dynamic viscosity (absolute viscosity)
  • Dynamic viscosity with temperature
  • Electrical conductivity
  • Electrical conductivity with temperature
  • Electrical resistivity
  • Electrical resistivity with temperature
  • Elongation
  • Fatigue S-N curve
  • Magnetic B-H curve
  • Maximum permeability
  • Maximum service temperature
  • Molecular mass
  • Poisson's ratio
  • Relative permittivity (Dk) with frequency
  • Remanent induction Br
  • Saturation induction Bs
  • Specific heat capacity
  • Specific heat capacity with temperature
  • Tangent modulus
  • Tensile strength
  • Tensile strength with temperature
  • Thermal conductivity
  • Thermal conductivity with temperature
  • Thermal expansion coefficient
  • Thermal expansion coefficient with temperature
  • True plastic stress-strain
  • Yield strength (elastic limit)
  • Yield strength with temperature
  • Young's modulus
  • Young's modulus with temperature

MMPDS-2024 Data

  • Density
  • Electrical Conductivity
  • Elongation (L-dir) with Temp.
  • Elongation, L
  • Fatigue Best Fit (S/N), L
  • Modulus, L
  • Poisson's Ratio, L
  • Specific Heat
  • Specific Heat with Temp.
  • Tens. Ult. Stress (L-dir) with Temp.
  • Tens. Yield Stress (L-dir) with Temp.
  • Tensile Modulus (L-dir) with Temp.
  • Tensile Stress/Strain, L
  • Thermal Conductivity
  • Thermal Conductivity with Temp.
  • Thermal Expansion
  • Thermal Expansion with Temp.
  • Ultimate Tensile Strength, L
  • Yield Strength, L

Global Metals Specifications

  • Density
  • Electrical resistivity with temperature
  • Elongation
  • Specific heat capacity (true) with temperature
  • Thermal conductivity with temperature
  • Thermal expansion coefficient (linear, mean) with temperature
  • Ultimate tensile strength
  • Yield strength
  • Young's modulus
  • Young's modulus with temperature

Global Polymers Plastics

  • CLTE, Flow
  • CLTE, Flow (TMA)
  • CLTE, Transverse
  • Coeff of Thermal Expansion vs. Temperature
  • Density
  • Dielectric Constant (Cured)
  • Dielectric Constant 1 to 999 GHz
  • Dielectric Constant 1 to 999 Hz
  • Dielectric Constant 1 to 999 kHz
  • Dielectric Constant 1 to 999 MHz
  • Dissipation Factor 1 to 999 GHz
  • Dissipation Factor 1 to 999 Hz
  • Dissipation Factor 1 to 999 kHz
  • Dissipation Factor 1 to 999 MHz
  • Elongation at Break MD (Films)
  • Elongation at Break TD (Films)
  • Flexural Modulus
  • Nominal Tensile Elongation at Break
  • Poisson's Ratio
  • Specific Heat Capacity
  • Specific Heat vs. Temperature
  • Tensile Elongation at Break
  • Tensile Elongation at Break (Elastomers)
  • Tensile Fatigue
  • Tensile Modulus
  • Tensile Modulus vs. Temperature
  • Tensile Modulus vs. Temperature, Dynamic
  • Tensile Strength
  • Tensile Strength (Cured)
  • Tensile Strength (Elastomers)
  • Tensile Strength (Films)
  • Tensile Strength at Break
  • Tensile Strength at Yield
  • Tensile Strength at Yield (Elastomers)
  • Tensile Strength at Yield MD (Films)
  • Tensile Strength at Yield (Films)
  • Tensile Strength at Yield TD (Films)
  • Thermal Conductivity
  • Thermal Conductivity vs. Temperature
  • True Stress vs Strain
  • Volume Resistivity
  • Volume Resistivity (Cured)

ESDU MMDH

  • 0.2% Tensile Proof Stress (L)
  • 0.2% Tensile Proof Stress (L) (at Temperature)
  • Density
  • Electrical conductivity
  • Elongation (at Temperature)
  • Elongation (L) (S basis)
  • Fatigue Strength (L)
  • Modulus of Elasticity (L)
  • Modulus of Elasticity (L) (at Temperature)
  • Poisson's ratio (L)
  • Specific heat capacity
  • Thermal conductivity
  • Thermal expansion
  • Ultimate Tensile Strength (L)
  • Ultimate Tensile Strength (L) (at Temperature)

ASME BPVC

  • Density
  • Min. tensile strength
  • Min. yield strength
  • Moduli of elasticity
  • Poisson's ratio
  • Tensile strength
  • Thermal conductivity
  • Thermal expansion
  • Yield strength

JAHM Curve Data

Temperature-dependent properties:
  • Core Loss Kc
  • Core Loss Ke
  • Core Loss Kh
  • Density
  • Dielectric Loss Tangent (Df)
  • Elastic Modulus
  • Electrical Conductivity
  • Electrical Resistivity
  • Fatigue (S-N Curve)
  • Magnetic Core Loss
  • Magnetization Curve B-H
  • Poisson's Ratio
  • Relative Permittivity (Dk)
  • Specific Heat Capacity
  • Tensile Strength
  • Thermal Conductivity
  • Thermal Expansion (Mean)
  • True Stress-Strain (Tension)
  • Viscosity
  • Yield Strength (Tension)

Electromagnetic Materials

  • B-H curve, demagnetization
  • B-H curve, initial magnetization
  • Core loss by weight
  • Core loss coefficients (power ferrite model, electrical steel model)
  • Density
  • Dielectric loss tangent (Df) with frequency
  • Djordjevic-Sarkar model: Conductivity at DC, Conductivity equation, Frequency, High frequency corner, Loss tangent, Relative permittivity, Relative permittivity at DC
  • Electrical conductivity
  • Electrical resistivity
  • Lamination thickness
  • Magnetic coercivity (intrinsic, Hci)
  • Magnetic coercivity (normal, Hc)
  • Magnetic loss tangent with frequency
  • Magnetic permeability with frequency
  • Magnetic remanence (Br)
  • Magnetic saturation
  • Maximum service temperature
  • Poisson's ratio
  • Relative permittivity (Dk) with frequency
  • Resin content
  • Specific heat capacity
  • Tensile strength
  • Thermal conductivity
  • Thermal expansion coefficient (xy)
  • Yield strength (elastic limit)
  • Young's modulus