Plotting Output Parameter Results for a Sensitivity Analysis

Follow this procedure to plot output parameter results versus sensitivity variable values on a rectangular (xy) plot:

1. In the Project tree, right-click the sensitivity setup for which you want to view the output parameter results and select View Analysis Result. The Post Analysis Display dialog box appears.

2. Under the Result tab, select Plot as the view type.
3. Select the sensitivity variable with the sweep values to plot on the X-axis from the X drop-down list.
4. Select the output parameter results to plot on the Y-axis from the Y drop-down list.

The xy plot appears in the Post Analysis Display dialog box.

The plot displays actual output parameter results for each solved design variation. It also displays a parabola that best fits these results. The parabola is a more accurate representation of sensitivity around the design point than any individual solved design variation.