Import IBIS Single Component or Pin or Buffer Element

IBIS devices are created in the Ansys Electronics Desktop (AEDT)^TM electronics systems design platform using Single Component Import, Pin Import or Buffer Model Import. A component import can include [Package Model] and [Pin Mapping] information to control power and parasitic package behavior. A Pin Import captures the behavior of a given pin on a component defined in the IBIS file. A device created via Pin Import contains the behavior of the model associated with the pin, and it also contains information about the parasitic package model specified for that pin. A buffer model import captures the behavior of a given model in an IBIS file without any package parasitic modeling.

The Import IBIS window enables the following actions:

• Import a complete component with a [Package Model] and importing all signal, power, ground, and NC pins. See Import Single Component with [Package Model], All Pins.
• Import a complete component with a [Package Model], but importing only selected signal, power, ground, and NC pins. See Import Single Component with [Package Model], Selected Pins.
• Import a complete component without a [Package Model], importing all signal pins. See Import Single Component with No [Package Model], All Pins.
• Import a complete component without a [Package Model], importing only selected signal pins. See Import Single Component with No [Package Model], Selected Pins.
• Import selected pins from a selected component. See Pin Import Tab.
• Import a buffer model without referencing a specific component or pin. See Buffer Import Tab.