Open topic with navigation
Transient Cosimulation Component
Program Requirements
- Twin Builder current version.
- Maxwell 2D or 3D current version, on a
Windows platform only.
- Maxwell 2D or 3D current version Updates for the Transient
Link:
Note: - For two-way interactive use, Maxwell must be installed
and licensed on the same computer as Twin Builder.
- If the computer is connected to a network and
is set to obtain an IP address, and the computer has an
IP address in the range 192.168.x.y, disconnecting from the network while
co-simulating will cause the co-simulation to stop.
- Maxwell 2D or 3D may be installed on a different
computer than the Twin Builder Installation, provided that a TCP/IP link
can be established between the two computers for co-simulation.
Twin Builder 2025 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.
