The Parameters Dialog Box Output/Display Tab

Use the Output/Display tab to control:

• If a parameter pin displays.
• If a parameter may be swept.
• If a parameter’s values are stored in the project database.
• How parameters and their values display on a schematic page.

Descriptions of the column headings for the Output/Display tab are as follows:

• Name - Non-editable field listing the names of component parameters.
• Description - Non-editable field that provides a brief description of the parameter.
• Show Pin - Show or hide a parameter pin.
• Sweep - When selected, enables the parameter value to be swept during an analysis.
• SDB - When selected, the parameter data is saved in the project database .sdb file.
• Direction - describes whether a parameter is an Input or an Output.
• Visibility and Location - Control the display and location of parameter information labels on a schematic sheet. These settings are the same as those found on the Property Display Tab of a component’s Properties dialog box.