Operations in the Diagram Editor

When the Diagram Editor is active, use the commands on the Edit menu and right-click menu to perform various operations on elements in the Diagram Editor. Available commands vary based on the current selection and on the previous command.

Rotate – Rotate a selected object or group of objects 90° counterclockwise.

Flip Vertical – Flip the selected object or group of objects around the X-axis. To flip multiple objects vertically:

Select (Ctrl+click) the objects you want to flip vertically.

Note:

The first object selected is highlighted in red; each subsequently selected object is highlighted in dark red.

Select Edit > Flip Vertical, or right-click the selected objects and select Flip Vertical.

Flip Horizontal – Flip the selected object or group of objects around the Y-axis. To flip multiple objects horizontally:

Select (Ctrl+click) the objects you want to flip horizontally.

Note:

The first object selected is highlighted in red; each subsequently selected object is highlighted in dark red.

Click Edit > Flip Horizontal, or right-click the selected objects and select Flip Horizontal.

Undo – Cancel the last operation.
Redo – Re-execute the last operation that was undone.
Cut – Remove the selected objects and retain a copy for pasting into a diagram in the same application.
Copy – Create a local copy of selected objects for pasting into a diagram in the same application.

Note:

Copy will not copy variables or equations.

Paste – Place objects from the previous Copy or Cut operation into the schematic.
Delete – Delete the selected objects.
Select All – Select all the objects on the diagram.
Push Down – Select an object on the diagram, right-click and select Push Down to open the hierarchy diagram of that object, if one is available.
Pop Up – Right-click the diagram and select Pop Up to go one level up in the hierarchy. This option is available if you are not at the top level of the hierarchy.