Modifying a Variable Sweep Definition Manually
You can manually modify the variable values solved for a parametric setup by changing, adding, or deleting existing points in a variable sweep definition under the Table tab of the Setup Sweep Analysis dialog box.
To manually modify a variable sweep definition:
- Click the Table tab of the Setup Sweep Analysis dialog box.
The design variations Twin Builder solves for the parametric setup are listed in table format.
- Do one of the following:
- To modify a variable value, click a value text box in the table and type a new value.
- To delete a variable value from the sweep definition, click the row you want to delete and click Delete.
- To add a new variable value to the sweep definition,
click Add then click in the
value text box and type a new value.
Warning:
Variable values must be single real numbers, or expressions that evaluate to single real numbers. Complex numbers cannot be used as the values of variables in any optimetric analysis.
Your modifications are tracked and available for viewing at the bottom of the Setup Sweep Analysis dialog box under the Sweep Definitions tab. The operations you performed are listed with descriptions.
If you modify an original sweep definition using the Add/Edit Sweep dialog box after manually modifying its table of design variations, your manual modifications become invalid and are removed. A warning informs you that your manual values are about to become invalid, so you can decide whether to proceed.