Lookup Table Equivalent Circuits

When exporting a Lookup Table model type:

1. Choose the appropriate Parametric Setup (defined within Optimetrics).
2. Click Next.
3. Under Circuit Inputs and Outputs, select the appropriate Type for each entry (for example, Current for independent variable which stands for current excitation and Rotation for independent variable—if any—which stands for motion definition) and define the Extrapolation method only for Inputs based on specific design considerations choosing the Bezier Interpolation method (for both Inputs and Outputs) or using the default Linear Interpolation method.
   Note:

   • In case of Lookup Table choice you must enter Calculations under Parametric Setup within Optimetrics to be able to get output entries in the Table dialog box within the extraction wizard.
   • Use Twin Builder compiler supported characters when naming these calculations entries within Optimetrics, otherwise you will encounter Twin Builder compiler errors when instantiating the ECE component.