Aborting an Analysis

To end the solution process before it is complete:

• Right-click In the Progress window and click Abort or click on drop-down button next to progress bar(s).

  The solver ends the analysis immediately.

The solver ends the analysis immediately. The data for the currently running adaptive pass, frequency point, time step, or variation is lost. Previously completed solutions may or may not be retained (depending on what process was interrupted by the Abort command). If you want to ensure that the results of all completed solutions are saved, use Clean Stop instead of Abort.

To abort the solution process after the current is complete:

• Right-click the Progress window, or click on drop-down button next to progress bar(s) and click Clean Stop on the shortcut menu.

  The analysis ends after the currently running adaptive pass, frequency point, time step, or variation has been solved. Solutions completed before the stop request are retained.

Linux

For Linux, you can use TERM commands. Sigterm handling is done in the Desktop library. You can abort a running batchsolve by sending a TERM signal to hfss.exe.