DC Extrapolation options

If the Design Setting for DC Extrapolation is set to Advanced, the DC Extrapolation tab appears for Fast and Interpolating sweeps. Otherwise, an effective DC value is calculated.

1. Setting the Initial Frequency to 0 enables DC extrapolation for a sweep.
2. Enter a value for the Minimum Solved Frequency. This value represents the smallest frequency in the sweep for which a full solution is generated. The default is 100 Mhz.
   Note:

   The Minimum Solved Frequency that you enter is solved independently of the step size.

If you expect to use the same settings often, you can click Set Defaults. To use previously saved settings, click Use Defaults.