Viewing Solution Data View Optimetrics Results Create or Modify Reports Create Animations Tune Reports Specify Output Variables Export Equivalent Circuit Data Using the Fields Calculator User Defined Outputs User Defined Documents Network Data Explorer

Postprocessing and Generating Reports

As Ansys Electronics Desktop completes a solution, you can display and analyze the results:

Image Map

  • View solution data including the following: convergence information, computing resources that were used during the solution process, mesh statistics, and matrices computed for the S-parameters, impedances, and propagation constants during each adaptive, non-adaptive, or sweep solution. For eigenmode solutions, you can view the real and imaginary parts of the frequency and quality factor Q computed for each eigenmode. Solution data can also be viewed while Ansys Electronics Desktop is generating a solution.
  • View analysis results for Optimetrics solutions.
  • Plot field overlays - representations of basic or derived field quantities - on surfaces or objects.
  • Overlay Field Plots on Models
  • Create 2D or 3D reports of S-parameters, basic and derived field quantities, and radiated field data.
  • Plot the finite element mesh on surfaces or within 3D objects.
  • Create animations of field quantities, the finite element mesh, and defined project variables.
  • Scale an excitation's magnitude and modify its phase.
  • Apply Derivative Tuning to Reports
Note:

Except in the case of non-model boxes drawn in the global coordinate system (CS), non-model objects cannot be used for any fields post processing operation You can use non-model boxes drawn in the global CS for post processing operations, including integration and solution domaining.