ScrEditMaterial

Edits an existing material.
UI Command:   Home > Edit Materials.
Syntax:   obj.ScrEditMaterial(<matType>, <matName>, <epsOrSigma>, <ltOrPerm>)
Parameters:  

BSTR matType (conductor or dielectric)

BSTR matName

DOUBLE epsOrSigma (conductivity for conductor or permittivity for dielectric)

DOUBLE ltOrPerm (permeability for conductor or loss tangent for dielectric)
Return Value:  

INT result:

  • 0 – Success
  • 1 – Material type is not "conductor" or "dielectric"
  • 2 – Material name does not exist in library
  • 3 – Material parameters are not within an acceptable range
VB Example:  

obj.ScrEditMaterial("conductor", "unobtanium", 5.7E+07, 0.5)
IPY Example:  

oDoc.ScrEditMaterial('conductor', 'unobtanium', 5.7E+07, 0.5)