Loading Data into Network Data Explorer

If you have run an SYZ sweep and launched Network Data Explorer from the Results window, solution data is automatically loaded and ready for viewing.

Otherwise, you must load a data file into Network Data Explorer.

You can import the following file types:

• Touchstone Format (*.s*p)
• Touchstone 2 Format (*.ts, *.sp)
• Citifile (*.cit)
• Neutral Format (*.nmf)
• State Space File (*.sss)
  Note:

  When a State Space File (*.sss) is loaded, Network Data Explorer regenerates s-parameter data based on the file.

  You can compare the regenerated s-parameters to the original data.

To import a file into Network Data Explorer:

1. From the ribbon, click Open. An Open window appears.
2. Navigate to and select a file.
3. Click Open. The file appears in the Data Selection Pane, under Files.

The file browser allows you to open multiple files at a time. However, the displayed data always corresponds to the data set indicated in the Network Data Selection pane. Click the file you want in that pane to switch between data sets. Use the Shift and Ctrl keys to select and display data sets from multiple files simultaneously.