Editing Length Settings in 2D Extractor

To edit the length settings for the post-processing options:

  1. Click 2D Extractor > Edit Length Settings.

    The Edit Length Settings dialog box appears.

  2. Specify the Units. All solutions in 2D Extractor are per unit length. For example, capacitance extracted by the solver is actually in "<SI units of C>/<SI units of Length>". You can choose the distributed units and view the solutions in the selected length unit.
  3. Specify the options for Lumped Length:
    • Enter a value in the Length text box and select the units.
    • Enter a value in the Rise Time text box and select the units. This value is used when exporting the equivalent circuit and calculating lumped crosstalk coefficient forward.
  4. If you want to save these settings as defaults and use them for other projects, select the Save As Default check box.
  5. Click OK.