Viewing RMxprt Solution Data
To access the Solutions dialog box, do one of the following:
- Click RMxprt > Results > Solution Data.
- Right-click Results in the project tree, and then click Solution Data on the shortcut menu.
- Right-click Setup1 in the Project tree, and then click Performance on the shortcut menu.
- Click the Solution Data icon on the Results ribbon.
The Solutions dialog contains three tabs:
- Performance – this contains a Data field with a drop-down menu that allows you to view many different data tables, which vary with the machine type. Some examples are:
- Aux Winding
- Full Load Operation
- Material Consumption
- No Load Operation
- Permanent Magnet
- Rotor Data
- Rated Parameters
- Stator Slot
- Stator Winding
- Steady State Parameters
- Design Sheet – this displays the contexts of the .res file for the current setup. The file contains tables with information for such things as (depending on the machine type):
- General Data
- Stator Data
- Rotor Data
- Permanent Magnet Data
- Material Consumption
- Rated Operation
- No-Load Operation
- Steady State Parameters
- No Load Magnetic Data
- Full Load Data
- Winding Arrangement
- Transient FEA Input Data
To print the design sheet:
- Right-click the design sheet to display the context menu.
- Select Print from the shortcut menu.
The Print dialog box appears.
- Select the printer, and click OK to print.
- Curves – this displays the plots that were automatically generated by the solver. You can select these from a drop-down menu (menu contents vary with the machine type):
- Input DC Current vs Speed
- Efficiency vs Speed
- Output Power vs Speed
- Output Torque vs Speed
- Cogging Torque in Two Teeth
- Induced Coil Voltage at Rated Speed
- Air Gap Flux Density
- Induced Winding Phase Voltage at Rated Speed
- Winding Currents Under Load
- Phase Voltage Under Load
Note: You can also open
the Solution Data dialog box
directly by
clicking the Solution Data icon on the Results ribbon.
To print plots from the Curve tab:
- Right-click on the desired plot to display the context menu.
- Click Print on the menu to display the Print dialog.
- Select the printer, and click OK to print.
Note: The context menu
also provides commands that allow the user to change various plot characteristics
such as: trace type and properties such as color; add/edit data markers
and labels; edit axis, legend, and title properties. The plot image can
also be copied to the clipboard for pasting in another application. Plot
data can also be exported to various formatted text files that can then
be imported into spreadsheets, etc. Refer to Modifying the Background Properties
of a Report for additional information.