To view actual output parameter values versus design point in data table format:

  1. In the Project Manager tree, right-click the sensitivity setup for which you want to view the parameter results, and then select View Analysis Result.

    2. The Post Analysis Display dialog box appears.

  2. Under the Result tab, select Table as the view type, if it is not already selected.

    3. The following values are listed in table format:

    • The regression value of the output parameter at the design point is listed in the Func. Value column.
    • The first derivative of the regression is listed in the 1st D column.
    • The second derivative of the regression is listed in the 2nd D column.
  3. Click Apply.

    4. Maxwell now points to the selected design variation as the nominal solution and as a result, the design displayed in the Modeler window is changed to represent the selected design variation.

    Click Revert to return the design in the view window to the original value.

Related Topics 

Plotting Output Parameter Results for a Sensitivity Analysis

Viewing Solution Data for an Optimetrics Design Variation