Stator Vent Data for Three-Phase Induction Motors
By option, you can add a vent to a three-phase induction motor.
To add a vent to stator in a three-phase induction motor:
- Select the stator icon in the Project Manager tree.
- Right-click to display the drop-down list and select Insert Vent.
The vent icon appears in the Project Manager tree under the stator.
To remove a vent to stator in a three-phase induction motor:
- Select the stator icon in the Project Manager tree.
- Right-click to display the drop-down list and select Remove Vent.
The vent icon disappears in the Project Manager tree under the stator.
The Vent data for the stator includes the following fields.
|
Vent Ducts |
Number of radial vent ducts |
|
Duct Width |
Width of radial vent ducts |
|
Magnetic Spacer Width |
Width of magnetic spacer which holds vent ducts. 0 for non magnetic spacer |
|
Duct Pitch |
Center-to-Center distance between two adjacent Vent ducts |