Stator Slot Data for Adjust-Speed Synchronous Machines
To access the stator slot data, double-click the Machine > Stator > Slot entry in the Project Manager tree.
The Stator Slot Data Properties window contains the following fields:
|
Auto Design |
Select or clear this to enable or disable auto-design of slots Hs2, Bs1, and Bs2. When this check box is selected, only two other fields appear in the window: Hs0 and Bs0. |
|
Parallel Tooth |
Select this to design Bs1 and Bs2 based on the tooth width. When this check box is selected, the Bs1 and Bs2 fields are removed, and the Tooth Width field is added. |
|
Tooth Width |
The tooth width for the parallel tooth, on which Bs1 and Bs2 are designed. |
|
Hs0 |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected) |
|
Hs1 |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected) |
|
Hs2 |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected) |
|
Bs0 |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected) |
|
Bs1 |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected) |
|
Bs2 |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected) |
|
Rs |
A slot dimension (see the diagram shown in the modeling window when Machine-Stator-Slot is selected); Rs is added when the slot type is 3 or 4. |