Name

The name of the setup. Not editable.

Enabled

Check box that enables/disables the solution setup.

Default is checked (enabled)

Operation Type

Set the type of operation for the machine analysis. drop-down menu selections are: Motor, Generator, Wind Generator. Default is Motor.

Load Type

Select the mechanical or electrical load type from the drop-down menu.

For Motor Operation Type the selections are: Const Speed, Const Power, Const Torque, Linear Torque, Fan Load. Default is Const Power.

For Generator and Wind Generator Operation Type the selections are: Infinite Bus and Independent Generator. Default is Infinite Bus.

Rated Output Power

Enter the rated mechanical or electrical output (apparent) power, and select the unit.

Rated Voltage

Enter a value for the rated voltage and select the unit.

Rated Speed

Type a value for the rated speed, and select the unit.

Operating Temperature

Type a value for the operating temperature, and select the unit.

Rated Power Factor

Enter the rated power factor for AC Source Type. This field is displayed only for AC Source Type. Default value is 0.8.

Capacitive Power Factor

Check box that enables/disables use of a capacitive power factor. Used together with the Rated Power Factor when the phase current leads the phase voltage, to determine load impedance. Default is unchecked.

Frequency

Enter a value for the frequency, and select the unit.