Solution Data for Claw-Pole Alternators
To access the solution data, right-click Analysis in the project tree, and click Add Solution Setup. For this machine type, there is only one tab, the General tab.
The Solution Setup window contains the following fields:
| General tab | |
|
Operation Type |
Select Motor or Generator from the drop-down menu. Generator is automatically selected for this machine type |
|
Load Type |
Select from Infinite Bus and Independent Generator. |
|
Rated Output Power |
Type a value for the rated output voltage, and select the units. |
|
Rated Voltage |
Type a value for the rated voltage, and select the units. |
|
Rated Speed |
Type a value for the rated speed, and select the units. |
|
Operating Temperature |
Type a value for the operating temperature, and select the units. |
| Claw-Pole Synchronous Machine tab. | |
|
Rated Power Factor |
Type a value in the field. |
|
Input Exciting Current |
Select this check box, enter a value, and select the units. If this check box is cleared, the value will be calculated automatically rather than entered. |
Related Topics
Setting Up Analysis Parameters for a Claw-Pole Alternator