Rotor Winding Data for Three-Phase Synchronous Machines
To access the rotor winding data, double-click the Machine > Rotor > Winding entry in the Project Manager tree.
The Rotor Winding Data Properties window contains the following fields:
|
Winding Type |
The type of rotor winding. Click the button to open the Winding Type window and choose from Round, Cylinder, and Edgewise. |
|
Parallel Branches |
The number of parallel branches in the rotor winding |
|
Conductors per Pole |
The number of conductors per rotor pole (0 for auto-design) |
|
Number of Strands |
The number of wires per conductor (0 for auto-design); only available with Round Winding Type. |
|
Wire Wrap |
The thickness of the double-sided wire wrap (0 to automatically obtain this value from the wire library) |
|
Interturn Insulation |
The thickness of the inter-turn insulation of an edgewise winding; only available with the EdgewiseCoil Winding Type. |
|
Wire Size |
The diameter of the wire (0 for auto-design). Click the button to open the Wire Size window where you can specify units, wire type, diameter, and gauge. |
|
Axial Clearance |
The axial gap between the field winding and the pole body or inner coil |
|
Limited Cross Width |
The limited cross-section width for the winding design or arrangement (0 for available maximum area) |
|
Limited Cross Height |
The limited cross-section height for the winding design or arrangement (0 for available maximum area) |
|
Winding Fillet |
The size of the winding fillet |