Resetting Analysis to Time Zero

Before rerunning a transient simulation that has data associated with it, you need to reset the analysis to time zero; otherwise, Maxwell will not overwrite the data that is already present because it will not rerun the simulation. Resetting the analysis to time zero invalidates the current solution and will instruct the software to start over from the beginning when you rerun the simulation.

If you have changed simulation parameters, the transient analysis will rerun without the user having to select Reset Time Zero.

To reset the analysis, do one of the following:

• Click Maxwell > Analysis Setup > Reset to Time Zero.
• In the Project Manager tree, right-click Setup under Analysis, and select Reset to Time Zero from the shortcut menu.