RMxprt Quick Report Categories

When using the Quick Reports function for Solutions, the following report categories may be available depending upon the solution parameters requested, solution type, etc:

Category	Description
Coil Voltage	Report voltages in the machine coil.
Current	Report currents for each line or phase of the machine, source current, line current, armature current.
Flux Density	Report flux density in the machine air gap, flux linkages.
Induced Voltage	Report Induced Line and Phase voltages.
Misc.	Report miscellaneous quantities specific to the machine type such as power factor, torque to current ratio.
Percentage	Report machine efficiency.
Power	Report air gap power, output power.
Torque	Report cogging torque, output torque, magnet generated torque, induction torque.
Voltage	Report Line and Phase voltage.
Angle	Reports power factor angle.
Angular Speed	Reports angular speed.
Inductance	Reports air gap permeance.