Defining Stator Slots for a Three-Phase NSSM

To define the slot dimensions:

  1. To open the Stator Slot Data Properties window, double-click the Machine > Stator > Slot entry in the project tree on the desktop. (You can also enter values in the Properties section of the desktop without opening a separate window.)
  2. Optionally, to automatically design the dimensions of slots Hs2, Bs1, and Bs2, select the Auto Design check box.
  3. Enter the available slot dimensions.

    Hs0

    Always available

    Hs2

    Available only when Auto Design is cleared. When Auto Design is selected, this slot dimension is determined automatically.

    Bs0

    Always available

    Bs1

    Available only when Auto Design is cleared. When Auto Design is selected, this slot dimension is determined automatically.

    Bs2

    Available only when Auto Design is cleared. When Auto Design is selected, this slot dimension is determined automatically.

  4. Click OK to close the Properties window.

Related Topics 

Defining Stator Windings and Insulation for a Three-Phase NSSM