Compensating Data for General DC Machines

By option, you can insert or remove Compensating for a General DC Machine.

To insert compensating:

Right-click on the Stator icon to display the pop-up menu.
Click Insert Compensating.

To remove an existing Compensating:

Right-click on the Stator icon to display the pop-up menu.
Click Remove Compensating.

To access the data for compensating inserted to a General DC Machine, double-click on the Machine > Rotor > Compensating item in the project tree.

The Compensating properties window contains the following fields.

Slots per pole	Number of slots per pole for the compensating winding.
Bc0	Opening width of the compensating slots.
Hc0	Opening height of the compensating slots.
Bc2	Width of the compensating slots.
Hc2	Height of the compensating slots.
Parallel branches	Number of parallel branches.
Conductors per slot	Number of conductors per slot for the compensating windings
Number of strands	Number of strands (number of wires per conductor), 0 for auto-design.
Wire wrap	Double-side wire wrap thickness, 0 for auto pickup in the wire library
Rectangle wire	Whether to use round (the default) or rectangle wire.
Wire size	Click the button to display the Wire Size window to specify the wire diameter and gauge.
Slot liner	Insulation slot liner thickness
End adjustment	one side end length adjustment of a conductor.