Assigning an Integrated Zero Tangential H Field Boundary for a Magnetostatic Solver

This type of boundary is applied when the integral of the tangential H field is zero.

Warning: When using integrated zero tangential magnetic field boundary conditions, always double-check that Ampere's law is not violated.

To define an integrated zero tangential H field boundary:

  1. Select the section of the geometry on which you want to apply the boundary condition (typically a face).
  2. Click Maxwell 3D > Boundaries > Assign > Integrated Zero Tangential H Field.
    The Integrated Zero Tangential H Field window appears.
  3. Enter a name for the boundary in the Name box, or accept the default.
  4. Click OK to assign the boundary to the selected object.

The new boundary is added to the boundary list in the project tree.