Assigning an Integrated Zero Tangential H Field Boundary for a Transient Solver

This type of boundary is applied when the integral of the tangential H field is zero.

Note: When using integrated zero tangential magnetic field boundary conditions, always double-check that Ampere's law is not violated!

To define an integrated zero tangential H field boundary:

  1. Select the section of the geometry on which you want to apply the boundary condition (typically a face).
  2. Click Maxwell 3D > Boundaries > Assign > Integrated Zero Tangential H Field.
    The Integrated Zero Tangential H Field window appears.
  3. Enter a name for the boundary in the Name box, or accept the default.
  4. Click OK to assign the boundary to the selected object.