Assigning a Flux Tangential Boundary for a Transient A-Phi Solver

Note: This setting is also applicable to the 3D Eddy Current A-F Solver.

This type of boundary is applied when the H field is tangential to the boundary.

To define a zero tangential H field boundary:

  1. Select the section of the geometry on which you want to apply the boundary condition (typically a face).

  2. Click Maxwell > Boundaries > Assign > Flux Tangential.

  3. The Flux Tangential window appears.

  4. Enter a name for the boundary in the Name box, or accept the default.

  5. Click OK to assign the boundary to the selected object.